The WUXGA-1912SD+ HDMI driver board for the eMagin SXGA OLED is designed for monocular, binocular and stereoscopic applications where each display engine must move independently and/or receive a different video signal.
The WUXGA-1912SD+ HDMI supports HDMI video input and comes available with built in EDID to ensure proper video card resolution configuration. A USB configuration cable along with PC software enables total control of the OLED via registers settings. All user configuration settings are stored in non-volatile memory. The built-in micro controller is available for custom application requirements such as external brightness control, screen rotation etc. External digital and analog I/O ports are also available for customer applications requirements as well.
It can be powered with as little as +3.5 volts and consumes 250mA, it can even be power from your PC’s USB port.
The + option allows you to order the driver board with image processing such as video scaling, cropping, shifting etc. Please enquire within for custom image processing requirements.
Video Input Type |
HDMI |
---|---|
OLED |
WUXGA |
Input Voltage Range |
Low: +3.3 - 5.0 V |
Image Processing |
Custom Image Processing |
Video Mode |
1 Input / 1 Output |
Audio |
No |
OLED Mounting |
Mounted on Driver Board |
Refresh Rate |
30 - 85 Hz |
Dimensions (inches) |
1.2 x 1.5 |