The SXGA-1012SD Analog VGA/DVI driver board for the eMagin SXGA OLED is designed for monocular, binocular and stereoscopic applications where each display engine must move independently and/or receive a different video signal.
The SXGA-1012SD Analog VGA/DVI supports Analog VGA-DVI video input and comes available with built in EDID to ensure proper video card resolution configuration. A USB configuration cable along with PC software enables total control of the OLED via registers settings. All user configuration settings are stored in non-volatile memory. The built-in micro controller is available for custom application requirements such as external brightness control, screen rotation etc. External digital and analog I/O ports are also available for customer applications requirements as well.
It can be powered with as little as +3.5 volts and consumes 250mA, it can even be power from your PC’s USB port.
Video Input Type |
Analog VGA-DVI |
---|---|
OLED |
SXGA |
Input Voltage Range |
Low: +3.3 - 5.0 V |
Video Mode |
2 Inputs / 1 Output |
Audio |
No |
OLED Mounting |
Mounted on Driver Board |
Refresh Rate |
30 - 85 Hz |
Dimensions (inches) |
1.2 x 1.5 |